Sharp DV-L70BL - Manual (Page 32)

29 GB
Connecting to External Equipment for Input
Selecting “INPUT” as the INPUT mode of the DVD player automatically
switches the function of its video and audio input/output jacks to input. Then
you can view images from a connected VCR or camcorder on the screen of
your DVD player.
External Equipment
To connect external equipment
Important!
• When inputting a modified PAL or NTSC signal, images will not appear on the
screen. This does not indicate malfunction.
• Be sure to turn both the DVD player and the other equipment off before
connecting them. Doing so protects against damage.
• Use only the audio and video cables supplied with the DVD player to connect
to the video input/output and audio input/output jacks. Using other cables can
cause malfunction.
• Refer to the operation manual for the other equipment for details about its
operation, connecting procedures, etc.
• Do not use the S-video cord for connecting to another device for input.
The S-video cord is for output only.
VCR (PAL system only) Camcorder
(PAL system only)
2 4 6
VOLUME VIDEO AUDIO PHONES
MAX MIN DIGITAL OUT (OPTICAL)
VIDEO AUDIO
Audio cord
(supplied)
To video
output jack
To audio
output jack
(Red)
(White)
S-video/
video cord
(supplied)
(Yellow)
VCR or other device
with external output jack
Jack and
Plug Colors
Video: Yellow
Audio Left: White
Audio Right: Red
CONNECTION and
INITIAL SETTING