Ski-Doo WAKE Series - Manual (Page 57)

CONTROLS/INSTRUMENTS/EQUIPMENTS
F00L2TY
1 2
TYPICAL
1. Latch hole
2. Pin
Seat Latch
Removing the seat allows access to
the engine compartment.
The seat latch is located at the rear end
and underneath the seat.
NOTE: On some models, it is neces-
sary to remove the rear seat first.
smo2008-001-015_a
TYPICAL — GTI AND RXP MODELS
1. Seat latch
1
F18L0CY
TYPICAL — GTX, RXT AND WAKE MODELS
1. Seat latch
To remove seat, pull the latch lever up-
ward and hold. Lift and pull the seat
rearward.
To latch seat, align latch hole with pin
then, firmly push down on the rear por-
tion of the seat.
F00L2TY
1 2
1. Latch hole
2. Pin
Engine Compartment
Removing the seat gives access to the
engine, electrical and fuel systems.
_______________
55