Samsung Version 1.1 - Manual (Page 49)

49
(5) Factory Default
If you click "factory default" button, all information or configuration of SNS-110 will return to the point of
purchase, except Ethernet address. Refer to APPENDIX B "Factory Default" for details.
Be careful not to install any other file except SNS-110 program
(sns110_vXXX_XXXX.bin) during S/W upgrade. You might accidentally trigger
the fatal system damage. Always reboot, after the system is upgraded.
After upgrading, Network setting (IP Address, DNS ) is not changed but the
user s input is initialized after rebooting and it has to be specified at
Administration Mode. Caution
Be careful when you execute “Factory Default”, because all configuration of
SNS-110 will return to the initial state, and it disables the Log-in.
Caution
(6) Software Reset
Reset the SNS-110 through Network.
The ‘Software Reset’ will disconnect all of the present connections of SNS-110.
Right after the S/W upgrade, ‘Software Reset’ doesn’t work.
Caution