Samsung Version 1.1 - Manual (Page 33)

33
In Cable Network through Cable Modem
(1) Connect according to "Connecting to Cable Modem" of Chapter 3 Connecting to Network, and turn
the SNS-110 power on.
(2) SNS-110 automatically receives the following information from the cable network manager by
executing DHCP (Dynamic Host Configuration Protocol), if connected to cable network through a
cable modem.
● IP Address
● Gateway
● Subnet Mask
(3) Please confirm the auto-assigned IP Address from PC terminal emulation (HyperTerminal) connected to
RS-232C.
Please, refer to "Connecting to RS-232C" and APPENDIX C "How to Use Console".