Sony ICD-UX300F - Manual (Page 106)

106 GB
Sound comes from the
speaker even when the
headphones are plugged in. • If you plug in the headphones not securely during playback, the
sound may come from the speaker. Unplug the headphones, and
then insert them securely.
• When you are listening to the FM radio, “Audio Output” is set to
“Speaker.” Set it to “Headphones” (page 61).
The operation indicator does
not light. • “LED” is set to “OFF.” Display the menu and set “LED” to “ON”
(page 80).
“Memory Full” is displayed
and you cannot start
recording. • The memory is full. Erase some of the messages (page 26) or
erase all the messages after you store them on your computer.
“File Full” is displayed and
you cannot operate the IC
recorder. • 99 messages have been recorded in the selected folder or 990
messages (when there are 10 folders) in total have been recorded.
Therefore you cannot record another message, or move a message.
Erase some of the messages (page 26) or erase all the messages
after you store them on your computer.
Recording is interrupted. • The VOR function is activated. Set “VOR” to “OFF” in the menu
(page 32).
Noise is heard. • An object, such as your finger, etc., accidentally rubbed or
scratched the IC recorder during recording so that noise was
recorded.
• The IC recorder was placed near an AC power source, a
fluorescent lamp or a mobile phone during recording or playback.
• Plug of the connected microphone was dirty when recording.
Clean the plug.
• The i (headphones) plug is dirty. Clean the plug.
Recording level is low.
• “Mic Sensitivity” (microphone sensitivity) is set to “Low .”
• Display the menu and set “Mic Sensitivity” to “High ” or
“S-High ” (page 29).
Symptom Remedy