Ad v a nced fe atur es, Timer and sleep operation (continued), Sleep operation – Sharp SD-CX1H User Manual
Page 52
52
CX1H_UK49-59.fm
00/12/17
Ad
v
a
nced Fe
atur
es
Ti
mer
a
nd S
le
e
p Oper
a
ti
o
n
Timer and Sleep Operation (continued)
Sleep operation
The radio, CD, and MiniDisc can all be turned off automatically.
To confirm the remaining sleep time:
The display will return to normal after approximately 10 seconds.
You can change the sleep time.
Press the ENTER button whilst the sleep remaining time is displayed (see steps 5
- 6 on the left).
To cancel the sleep operation:
The sleep timer is cancelled when the unit enters the stand-by mode.
To cancel only the sleep timer without setting the unit to the stand-by mode, proceed
as follows.
1
Play back the desired sound source.
2
Press the TIMER/DELETE button.
3
Within 10 seconds, press the REC LEVEL/CURSOR or button
to select "SLEEP".
4
Within 10 seconds, press the ENTER button.
5
Press the REC LEVEL/CURSOR or button to specify the sleep
time.
(Maximum: 2 hours - Minimum: 1 minute)
6
Press the ENTER button.
7
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
1
Press the TIMER/DELETE button whilst the sleep timer is set.
2
Within 10 seconds, press the REC LEVEL/CURSOR or button to select
"SLEEP".
Remaining sleep time
1
Press the TIMER/DELETE button whilst the sleep timer is set.
2
Within 10 seconds, press the REC LEVEL/CURSOR or button to select
"SLEEP OFF".
3
Within 10 seconds, press the ENTER button.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)