Sharp SD-CX1H - Manual (Page 25)

25
CX1H_UK17-25.fm 00/12/17
Ad
v
a
nce
d
CD
/MD Pla
y
ba
c
k
P
rog
ra
mme
d
p
la
y
Programmed Play
Up to 20 CD tracks or 20 MD tracks can be programmed.
You cannot programme CD and MiniDisc tracks together at the same time.
To clear the programmed selections:
Press the CLEAR button whilst the "PROGRAM" indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last
track programmed.
To cancel the programmed play mode:
Whilst in the stop mode, press the CLEAR button. The "PROGRAM" indicator will dis-
appear and all the programmed content will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "PROGRAM" indicator will be dis-
played. Then follow steps 1 - 5 to add tracks. The new tracks will be stored after the
last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or button.
Notes:
Ejecting a CD or MiniDisc automatically cancels the programmed sequence.
Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD or MD to another function, the programmed selections will
not be cleared.
During programme operation, random play is not possible.
1
Whilst in the stop mode, press the CD or MD button.
2
Press the PROGRAM button to enter the programming save mode.
3
Press the direct buttons to select the desired track.
4
Repeat step 3 for any other track. Up to 20 tracks can be pro-
grammed.
If the total programmed playback time exceeds 400 minutes, "--:--" is displayed.
However, it is properly memorised.
5
Press the CD or MD button.
6
Press the CD or MD button to start playback.
Playback order
Playback time
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)