Sharp SD-CX1H - Manual (Page 45)

45
CX1H_UK42-48.fm 00/12/17
M
D
Editi
n
g
E
d
it
in
g
a Rec
o
rd
ed M
iniDisc
To combine tracks Notes:
First, put the two tracks next to each other in the order you want using the MOVE
function. Then combine them using the COMBINE function.
This function cannot be used in the random play mode and programmed play
mode.
If both tracks to be combined have a name, or only the first track has a name, the
first track name will be used.
When the first track does not have a name, the combined track will be named as
follows.
In the following cases, tracks may not be combined.
Digital recorded track and analogue recorded track.
Tracks recorded in different recording modes (monaural, stereo, 2 times long
recording, 4 times long recording) cannot be combined.
Short tracks may not be combined (8 seconds for stereo, 16 seconds for monaural
and 2 times long recording, 32 seconds for 4 times long recording).
1
Whilst in the stop mode, select the second of the two adjacent
tracks you want to combine by pressing the
or button. Or
start playing the second of the two tracks you want to combine,
and then press the MD
button.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select
"COMBINE" by pressing the REC LEVEL/CURSOR or button.
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the NAME/TOC EDIT button.
4
Press the ENTER button again.
The two tracks are combined, and the unit is stopped at the beginning of the com-
bined track.
The numbers assigned to the tracks following the combined track are automati-
cally decreased by one.
The second track name will be used for tracks recorded in monaural or stereo.
No name will be given to tracks recorded in 2 times or 4 times long recording mode.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)