Sharp SD-CX1H - Manual (Page 40)

40
CX1H_UK35-41.fm 00/12/17
MD Reco
rd
ing
Recor
d
ing
t
o
a
MiniD
isc
fr
om t
h
e
Radio
Recording to a MiniDisc from the Radio
To interrupt recording:
Press the MD
button.
To resume recording from the same point of MiniDisc, press the MD button again.
To stop recording:
Press the MD button.
The MiniDisc will stop.
To mark track numbers whilst recording from the radio:
Press the REC button at the desired position during recording to create a new track
number. The track counter will be increased by one every time the button is pressed.
1
Tune in to the desired station. (See page 26.)
2
Load a recordable MiniDisc into the MD compartment.
3
Press the REC MODE button to select the recording mode.
4
Press the REC button.
The unit will enter the recording stand-by mode.
5
Press the MD button to start recording.
About track numbers:
A recording is performed as a single track,
and only one number is created.
Track A
Single track
First track
MiniDisc
Radio
Third track Second track
Track B Track C
(Track A) (Track B) (Track C)
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)