Sharp SD-CX1H - Manual (Page 24)

24
CX1H_UK17-25.fm 00/12/17
Ad
v
a
nce
d
CD
/MD Pla
y
ba
c
k
Dir
e
ct pla
y
/ Repe
at or
Ra
nd
om
p
la
y
Direct Play
When in the CD or MD mode, press the direct buttons to select the desired tracks.
To select a track between the 11th and 99th tracks:
Select the track after pressing the 10 button.
A. For example, to choose 28
To select a track beyond the 100th track (MD only):
Select the track after pressing the 10 button twice.
B. For example, to choose 105
Repeat or Random play
You can select the CD or MD playback mode; "Repeat play", "Random play" and
"Normal play".
To repeat a programmed sequence:
Perform steps 1 - 5 in the "Programmed Play" section and then select the repeat play-
back.
Notes:
You can select the playback mode by pressing the PLAY MODE button on the
main unit.
During programme operation, random play is not possible.
After using repeat play, be sure to press the button. Otherwise, the disc(s) will
play continuously.
The random play will stop automatically when all tracks are played once. (The
same track will not be played back twice.)
In random play, the CD or MiniDisc player will select and play tracks automatically.
(You cannot select the order of the tracks.)
To cancel repeat or random play:
Press the PLAY MODE button repeatedly to select the normal play mode.
1 Press the " 10" button.
2 Press the "2" button.
3 Press the "8" button.
1 Press the " 10" button twice.
2 Press the "1" button.
3 Press the "0/10" button.
4 Press the "5" button.
1
When in the CD or MD mode, press the PLAY MODE button repeat-
edly to select the playback mode.
2
Press the CD or MD button to start playback.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)