SMC Networks SMC2670W - Manual (Page 9)

11
1.1 | Wireless Ethernet Adapter LED Indicators
The preceding diagram shows the location of all ports, jacks,
controls, and LED indicator lights on the EZ Connect 11 Mbps
Wireless Ethernet Adapter. The Wireless Ethernet Adapter
contains 1 external antenna, which is adjustable for best
wireless reception.
The front of the Wireless Ethernet Adapter has 3 labeled indi-
cator lights. When you connect your Wireless Ethernet Adapter,
these lights will be on, off, or blinking, indicating the following
states.
Light On Off Blinking
LNK/ACT Ethernet Connection No Ethernet Data being sent or
Connection received over
Ethernet
TX/RX Wireless Connection No Wireless Scanning for
Connection wireless signal
PWR Receiving Power Not Receiving N/A
Power