SMC Networks SMC2670W - Manual (Page 26)

28
6.1 | Configure WEP using Windows-based Utility
1. Log into the SMC2670W using the Windows-based Utility.
(see section 4.1 for more information)
2. Click on the [SECURITY] button.
3. Click the [SETUP >] button.
4. Set the security level under the [Encryption] section.
5. Set the WEP key format you want to use under the [Key for-
mat] section. (See Section 6 for information on WEP Key struc-
tures)
6. Depending on the Encryption Level and Key Format, set the
WEP Key under the [Edit key] section and select the key you
want to use.