SMC Networks SMC2670W User Manual

Page 37

If you are still unable to get a wireless connection after verify-
ing the settings listed above, then try to move the Wireless
Ethernet Adapter closer to your Wireless Broadband
Router/Access Point.

If the SMC2670W connects when you move it closer to the
Wireless Broadband Router/Access Point then you configura-
tion is correct. Re-position your Wireless Broadband
Router/Access Point and/or the SMC2670W to improve the
wireless coverage area.

If you still experience a connection issue after the steps out-
lined above, please contact the SMC Technical Support Team at
1-800-SMC-4-YOU for more information.

2. I don’t know how to change the SMC2670W’s IP address.

There are two ways to change the IP configuration of the
SMC2670W.

Using the Web-Based Utility:

a) Log into the Web-Based Utility (default IP address is:

192.168.2.25)

b)Click on the [TCP/IP] section link, and then click on the

[Setup] link.

c) From this section, you can change the following:

• IP address
• Subnet Mask
• Gateway

When you have completed your changes, click the [Apply]
button to save the new settings. To apply these new changes,
you will need to reboot the SMC2670W. When prompted, click
the [OK] button.