Connecting the control panel – SUPER MICRO Computer SUPERSERVER 6012L-6 User Manual
Page 40

5-6
S
UPERSERVER 6012L-6 User’s Manual
Figure 5-3. P4DLR+ Front Control Panel Header Pins
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors. See
Figure 5-3 for the pin locations of the various front control panel buttons
and LED indicators. Please note that even and odd numbered pins are on
opposite sides of each header.
All JF2 wires have been bundled into single ribbon cable to simplify their
connection. Make sure the red wire plugs into pin 1 as marked on the
board. The other end connects to the Control Panel printed circuit board,
located just behind the system status LEDs in the chassis.
See the Connector Definitions section for details and pin descriptions of
JF1.
P ower Button
O verheat LED
1
NIC 1 LED
Reset B utton
2
P ower Fail B utton
NIC 2 LED
HD D LE D
P ower LE D
Re se t
Pwr
Vcc
Vcc
Vcc
Vcc
Vcc
G round
G round
19
20
Vcc
X
NM I
G round
X
JF 1