Sherwood R-865 User Manual

Page 64

ENGLISH

• Each time these buttons are pressed, “

” is moved

to the corresponding channel.

Note :

• Depending on the speaker settings and surround

mode, etc., some channels cannot be selected.

• You can adjust the current channel levels as desired. These adjusted levels are just memorized, not into preset

memory.

• Each time these buttons are pressed, the channel

level can be adjusted within the range of -15~+15
dB.

Press the CURSOR UP(

)/DOWN(

)

buttons to select the desired channel.

Repeat the above steps

and

to adjust each channel level until the sound level of each speaker

is heard to be equally loud.

Press the CURSOR LEFT(

)/RIGHT(

)

buttons to adjust the level of the selected
channel as desired.

• You can memorize the current channel levels into preset memory with performing “When selecting the PRESET

1 or PRESET 2 ” procedure on the previous page.

Press the CURSOR UP(

)/DOWN(

) buttons to select the CH LEVEL TRIM, then press the

ENTER button.

Preform the steps

in “When selecting the PRESET 1 TRIM or PRESET 2 TRIM” procedure on

the previous page.

When selecting the CHANNEL LEVEL TRIM

C H L E V E L T R I M

R E T U R N : B a c k , : S e l e c t

F L