Function parameters for ej – Sharp ELECTRONIC CASH REGISTER XE-A201 User Manual
Page 48
46
Function parameters for EJ
* Item:
Selection:
Entry:
A
Always enter 0.
(Fixed position)
0
B
Always enter 0.
(Fixed position)
0
C
Temporary EJ printing during transaction
Disallow
0
Allow*
1
D
EJ printing and clearing EJ data when
No*
0
issuing general Z1 report
Yes
1
E
PGM mode operation records type
Details*
0
Header information only
1
F
REG/MGR/VOID modes operation
Details*
0
records type
Total
1
G
Compressing printing for EJ data
No (normal size)
0
Yes (small size)*
1
H
Action when EJ memory area is full
Continue
0
Warning (near full warning)*
1
Lock (with near full warning)
2
On the default setting, an asterisk is marked.
Temporary EJ printing during transaction
• If selecting “yes”, you can print journal data of a current transaction recorded in EJ memory by pressing the
R
key during the transaction. To realize this function completely, the cash register is programmed to
receipt printing and set Receipt ON/OFF function to OFF.
PGM mode operation records type
• For data of program reading operation, the header information only is printed.
For X/Z reports, the header information only is printed.
(Receipt sample for Header Information only)
Action when EJ memory area is full
• By default, when the memory for EJ becomes nearly full, the cash register shows decimal points at the 8th
and 9th positions of the display (EJ memory nearly full message), and the cash register keeps storing new
data while erasing the oldest data. When “0” is selected, the cash register will not show EJ memory nearly
full message. When “2” is selected, the cash register shows EJ memory nearly full message and when the
memory gets full, the cash register locks the sales/data entry with a display of the memory full message
“
”. You can only issue an EJ report.
s
68
@
00100002
s A
Key operation example
s
s
68
@
*ABCDEFGH
A
To set “00000000”