Data plate, How to obtain service or parts – Siemens HB30S51UC User Manual
Page 43
English 40
Data Plate
The data plate shows the model and serial number. Refer to the data plate on the
appliance when requesting service. The data plate is located on the underside of
the control panel:
How to Obtain Service or Parts
To reach a service representative, see the contact information at the front of the
manual. Please be prepared with the information printed on your product data plate
when calling.
Fan is running during modes that do not
use convection
On some models, the convection fan runs while the oven is preheating.
This is normal.
Warm air or steam escapes from oven
vent.
It is normal to see or feel steam or warm air escaping from the oven vent.
Do not block the vent.
Cooling fan runs even when the oven is
turned off.
This is normal. The cooling fan will continue to run, even after the oven has
been turned off, until the oven has cooled sufficiently.
Oven Problem
Possible Causes and Suggested Solutions
Data Plate