Siemens HB30S51UC - Manual (Page 39)

English 36
Maintenance
Replacing an Oven Light
Use only 10 Watt, 12 Volt bi-pin halogen light bulbs. These bulbs can be purchased
through retail stores.
Use a clean, dry cloth to handle halogen light bulbs. This will increase the life of the
bulb.
To replace the halogen bulb on the oven ceiling:
To replace the halogen bulb on the oven sidewall:
m
CAUTION:
• Make sure the appliance and lights are cool and power to the
appliance has been turned off before replacing the light bulb(s).
Failure to do so could result in electrical shock or burns.
• The lenses must be in place when using the appliance.
• The lenses serve to protect the light bulb from breaking.
• The lenses are made of glass. Handle carefully to avoid
breaking. Broken glass could cause an injury.
• Light socket is live when door is open.
1. Turn off power to the oven at the main
power supply (fuse or breaker box).
2. Remove the glass cover by
unscrewing it.
3. Remove the halogen bulb and replace.
Grasp the new bulb with a clean, dry
cloth.
4. Screw the glass cover back on.
5. Turn power back on at the main power
supply (fuse or breaker box).
1. Turn off power to the oven at the main
power supply (fuse or breaker box).
2. Push the top mounting clip back and
remove the glass cover.