Operation, About the appliance, Basic features – Siemens HB30S51UC User Manual
Page 14: Turning the oven on and off, Setting the clock
English 11
Operation
About the Appliance
Your new oven combines popular functions, premium cooking results and simple
operation.
The "cookWiz" function makes it possible to select the desired food type using the
display menu. The oven then starts automatically, using the correct cooking mode
and temperature.
This oven can also provide assistance after cooking: Thanks to "Self-Clean" mode,
hours of scrubbing into the darkest corners of the oven is a thing of the past. The
oven burns off soil simply and easily. All that is left to do is to remove a few ashes
from the oven when Self-Clean is done.
The oven design has been optimized to improve heat distribution in the oven cavity.
The result is even browning, shorter cooking times and lower energy consumption.
These advantages are especially noticeable in the "Convection" cooking modes. In
Convection modes, an extra fan distributes the hot air evenly throughout the oven.
Clear labeling of the touch keys make operating the oven very easy. In addition,
messages on the display provide assistance when adjusting settings. This manual
includes all instructions for operating the oven.
Please call us if you ever have any questions. Our telephone number is located at
the beginning of this manual. We welcome your comments and suggestions!
Basic Features
Turning the Oven On and
Off
To turn the oven on:
Press on/off.
The last oven mode selected and the default temperature appear in the display.
To turn the oven off:
Press on/off.
The oven returns to standby mode.
Double ovens: to switch off only one oven, select the corresponding oven cavity
using upper or lower. Next press pause/stop twice.
Setting the Clock
This new oven includes time functions that require the current time to be set. It is
therefore important to set the clock first.
In order to access the menu for setting the clock, a cook time cannot be set.
After a power outage, the menu for setting the clock appears automatically. In this
case, proceed directly to step 2.