Inserting rack, Flat rack, Grasp rack firmly on both sides – Siemens HB30S51UC User Manual
Page 11: Insert rack (see picture), Tilt rack up to allow stop into rack guide
English 8
Inserting Rack
Flat Rack
The rack is designed with a stop so it will stop before coming completely out of the
oven and not tilt.
Inserting Flat Rack into Oven:
Removing Flat Rack from Oven:
1.
Grasp rack firmly on both sides and pull rack toward you.
2.
When the stop is reached, tilt rack up and pull the rest of the way out.
m
CAUTION:
To avoid burns, place oven racks in desired positions before turning
oven on. Always use oven mitts when the oven is warm. If a rack
must be moved while the oven is hot, do not let oven mitts contact
hot heating elements.
To avoid possible injury or damage to the appliance, ensure flat rack
is installed exactly per installation instructions and not backwards or
upside down.
1.
Grasp rack firmly on both sides.
2.
Insert rack (see picture).
3.
Tilt rack up to allow stop into rack
guide.
4.
Bring rack to a horizontal position and
push the rest of the way in. Rack
should be straight and flat, not
crooked.