SMC Networks Air Weigh AW5800 - Manual (Page 13)

13
Air-Weigh recommends the following install
procedure:
1. Weld or glue sensor bracket to axle.
2. While weld is cooling or glue is curing, mount in-cab
components.
3. Continue deflection sensor install after weld has
cooled or glue has cured.
4. Apply epoxy paint to glue and axle seam; let dry.
ASSEMBLY INSTRUCTIONS FOR GLUE KIT 010-0069-00X
1. Break tab off glue cartridge.
2. Slide glue into sleeve, align correctly (one
side has a larger diameter).
3. Insert blue plunger into glue pack, align
correctly (one side has a larger diameter).
4. Insert nozzle into glue cartridge. Twist to
secure.
5. Insert glue cartridge assembly into caulk gun.
6. Press trigger until glue flows from the nozzle
freely.