Sony GRAND WEGA 2-694-282-13(1) - Manual (Page 71)

masterpage:3 columns Right
71
O
th
e
r Info
rm
atio
n
F:\Worker\SONY TROY2 ANA EN 12(1)\2694282121\01US08OTH.fm
KF-42/50E200A
2-694-282-12(1)
Channels
General
Cannot raise the volume on
external speakers ❏ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 53). Or, to use the TV remote control, set the Audio Out
option to Variable.
❏ To turn on the TV speakers, set the Speaker option to On (see page 53).
No audio for HDMI
❏ Confirm DVD player, set-top-box audio settings. Select 2 channel LPCM audio.
Problem Possible Remedies
Problem Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna ❏ Press ANT to select the VHF/UHF/CABLE input (see page 33).
❏ Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV’s memory (see page 56).
Cannot receive any channels
when using cable TV ❏ Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV’s memory (see page 56).
❏ Press ANT to select the CABLE input (see page 33).
Cannot receive or select
channels
❏ Use Auto Program in the Channel setting to add receivable channels that are not
presently in TV memory (see page 56).
Problem Possible Remedies
How to reset TV to factory
settings ❏ Turn on the TV. While holding down the
M button on the remote control, press the
POWER button on the TV. Release the POWER button then release the M button.
The TV will turn itself off, then back on again with Initial Setup.
WARNING: This operation will clear all of your customized settings including
Parental Lock setting.
How to restore Picture settings
to factory settings
❏ Select Reset setting option while in the Picture setting (see page 49).
How to restore Sound settings
to factory settings ❏ Select Reset setting option while in the Sound setting (see page 52).
Cannot cycle through the other
video equipment connected to
the TV ❏ Be sure that the Label Video Inputs option is not set to Skip (see page 60).
Cannot operate the setting
❏ If a setting option appears in gray, this indicates that the setting option is not available.
Lost password ❏ On the password screen (see page 57), enter the following master password: 4357.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
TIMER LED on front panel is
lit
❏ When lit, indicates that the timer is set (see page 62). When the timer is set, this
LED will remain lit even when the TV is turned off.
LAMP LED blinks in red
❏ Replace the lamp (see page 66).
Digital cable box does not work ❏ If you are connecting a VCR and digital cable box using a splitter, as described on
page 26, you must use a special bi-directional splitter that is designed to work with
your digital cable box. Contact your cable provider for details.
(Continued)