Connecting the tv, Overview, Making video and audio connections – Sony GRAND WEGA 2-694-282-13(1) User Manual
Page 17
17
F:\Worker\SONY TROY2 ANA EN 12(1)\2694282121\01US04INS.fm
masterpage:3 columns Right
Conn
ectin
g the
TV
KF-42/50E200A
2-694-282-12(1)
Connecting the TV
Overview
To display clear crisp pictures, you must connect your TV correctly and
select the correct Wide Mode to display the picture in the correct aspect ratio
(see “Using the WIDE Button” on page 41). It is strongly recommended to
connect the antenna using a 75-ohm coaxial cable to receive optimum
picture quality signal. A 300-ohm twin lead cable can be easily affected by
radio noise and the like, resulting in signal deterioration. If you use a 300-
ohm twin lead cable, keep it as far away as possible from the TV.
Making Video and
Audio Connections
The signals that enter your TV and connected devices will need to output in
the correct format using the suitable connections. Below are different types
of video connectors available these days. Your TV comes with all types of
connectors with the exception of the DVI connector but your cable box or
satellite receiver may be equipped with this type. When connecting your TV,
use the inputs that are available on your devices that provide the best video
performance, as described below.
Best Video
Performance
Connector type
Separate audio
connection required
HDMI
(High-Definition Multimedia Interface)
No
DVI (Digital Visual Interface)
*
Yes
Component video
(480i/480p/720p/1080i)
S VIDEO
Composite video
RF/Coaxial
No
* An adapter is necessary when you are connecting a DVI-equipped device to this TV
L-AUDIO-R
Y
P
B
P
R