Sony GRAND WEGA 2-694-282-13(1) - Manual (Page 35)

masterpage:3 columns Right
35
Watc
hing
the
TV
F:\Worker\SONY TROY2 ANA EN 12(1)\2694282121\01US05REM.fm
KF-42/50E200A
2-694-282-12(1)
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Follow the steps below to program your TV’s remote control to operate non-
Sony video equipment.
Find the three-digit code for your equipment from the “Manufacturer’s
Codes” listed on page 36. If more than one code number is listed, try
entering from the code listed first.
1 Press and hold the , or FUNCTION button you want to
program on the remote control and press the button simultaneously.
The selected FUNCTION button (BD/DVR, VCR/DVD or
SAT/CABLE) will flash.
2 Enter the three-digit manufacturer’s code number using the --9
buttons while FUNCTION button is lit. If the code is not entered within
10 seconds, you must start from step 1 again.
3 Press the button.
When the programming is correct, the selected FUNCTION button
flashes twice. When not correct, the button flashes five times.
To check if the code works
Aim your TV’s remote control at the equipment, and press the green
button. If the equipment turns on and off, the programming is completed. If
not, try the next code listed.
Sony Equipment Programmable Code Number
BD (Blu-ray Disc)/DVD 101
DVR/VCR 901 (Sony Dream System)
SAT/CABLE 801 (Sony Satellite Receiver)
✍
While , and buttons are labeled as such, you can still
program any of your connected equipment using any one of the
buttons regardless of the label. For example,
button can be
programmed to operate your VCR. If you have a DVD/VCR combo
that you want to operate with your TV remote control, you can
program with the
or or even the , but remember which
button you have programmed for your particular use.
✍
If no code is input within the above specified time, or an invalid or
incorrect code number is input, the remote control automatically
goes back to the previous setting.
✍
In some cases, you may not be able to program your remote
control to operate other equipment. In such cases, use the
equipment’s own remote control.
ENT
RETURN
TOOLS
TV/VIDEO
FUNCTION
TV BD/DVD
POWER TV POWER
JUMP ANT FREEZE
SURROUND PICTURE SOUND WIDE
VISUAL SEARCH PAUSE
PLAY
STOP
REC REC PAUSE REC STOP
TOP MENU MENU F1 F2
G UIDE
DISP
LA
Y
REPLAY ADVANCE NEXT PREV
TV
CH VOL
MENU
MUTING
MODE
DVR/VCR SAT/CABLE
1
1
3
2
SLEEP
BD/DVD
BD/DVD DVR/VCR SAT/CABLE
DIS
PL
A Y
BD/DVD DVR/VCR SAT/CABLE
BD/DVD
BD/DVD DVR/VCR SAT/CABLE
POWER POWER