Sony GRAND WEGA 2-694-282-13(1) - Manual (Page 15)

F:\Worker\SONY TROY2 ANA EN 12(1)\2694282121\01US03WEL.fm masterpage:3 columns Right
15
Introd
ucin
g the
TV
KF-42/50E200A
2-694-282-12(1)
Jack Description
1 HD/DVD IN 2
(1080i/720p/
480p/480i) Connects to your equipment’s component video (YP
B
P
R
) output jacks. Component video
provides better picture quality than the S VIDEO (4 of rear panel) or the composite video
(6 of rear panel) connections.When Auto is selected for the Video 2 (Component) option in
the Setup settings, the component video function will be the default stream when present (see
page 61).
2 VIDEO IN 2 Connects to the composite video output jack on your camcorder or other video equipment.
✍
When connecting composite video to VIDEO IN 2, be sure to select Video 2
(Component) to Off in the Setup settings to activate both audio and video
function for composite connection (see page 61).
3 AUDIO IN 2
L (MONO)/R Connects to the audio (L/R) output jacks of your equipment such as camcorder or other video
equipment which you want an easy access.
4 VIDEO IN 1
S VIDEO Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than the composite video (6).
5 VHF/UHF/
CABLE RF input that connects to your cable or VHF/UHF antenna signal.
6 VIDEO IN 1/3
VIDEO/
L (MONO)-
AUDIO-R Connects to the composite video and audio output jacks on your VCR or other video
equipment. A third composite video and audio (VIDEO 2) is located on the left side panel of
the TV.
7 HDMI IN 6
HDMI/
R-AUDIO-L HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video equipment, such
as a set-top box, Blu-ray Disc player, DVD player, A/V receiver as well as PC. HDMI supports
enhanced, or high-definition video, plus two-channel digital audio. You can also connect a
DVI-equipped device to your TV by using an HDMI-to-DVI cable.
8 HDMI IN 7 When HDMI to DVI cable is used to connect your equipment for video, be sure to use audio
cable for the sound. See page 30 for connecting to your personal computer.
9 Service Port For service use only.
0 AUDIO OUT
(VAR/FIX) L/R Connects to the left and right audio input jacks of your audio or video equipment. You can use
these outputs to listen to your TV’s audio through your stereo system.
qa HD/DVD IN 4/5
(1080i/720p/
480p/480i)/
L-AUDIO-R Connects to your equipment’s component video (YP
B
P
R
) and audio (L/R) jacks. Component
video provides better picture quality than the S VIDEO (4) or the composite video (6)
connections.