Siemens C2 - Manual (Page 8)

8
Preparing to use your phone
Gigaset C2 / englisch / A31008-C002-B001-2-QD19 / start_guide_time.fm / 28.03.2003
1. On the handset
Base 2 flashes in the display when the system PIN has been entered.
2. On the base
Please refer to the operating instructions for the base to find out how to prepare the
base for registration.
Changing the display language
You can view the display texts in different languages.
If you set the wrong language in error, press MENU M 2 . Now select the correct
language with
s
and press OK to confirm your choice.
Changing the base
If your handset is registered to more than one base, you can set it to a particular base or
to the base that has the best reception (Best Base).
MENU
; s
Handset Settings OK; s
Select Base OK ; s (select a base or Best
Base ) OK
[______________] MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________] Handset Settings
[_________ ] OK
Select the menu item and confirm.
[__________] [_____________________________________________________________] Register Handset
[_________ ] OK
Select the menu item and confirm.
[__________] [_____________________________________________________________] Base 2
[_________ ] OK
Select base (1–4) and confirm, e.g. Base 2.
[_______] OK
Enter the system PIN of the base (the default is 0000)
and confirm.
[______________] MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________] Handset Settings
[_________ ] OK
Select the menu item and confirm.
[__________] [_____________________________________________________________] Language
[_________ ] OK
Select the menu item and confirm. The current
language is checked
‰
(the default language is
English).
[_________] [_________] OK
Select a language and confirm.
Long press (back to idle status).