Siemens C2 - Manual (Page 18)

18
Using several handsets
Gigaset C2 / englisch / A31008-C002-B001-2-QD19 / tel_direct_hands_sett.fm / 28.03.2003
◆ If you redirect your room monitor to an external number, then you should tell that
number's owner.
◆ The room monitor's call to an external phone number stops after about 90 seconds,
to an internal number (handset) it stops after about 180 seconds (depending on the
base).
Activating the room monitor function and entering the 'call to' number for
the first time
MENU ;
s
Additional Features OK; Room Monitor OK .
If the room monitor is activated, you go straight to the room monitor setting when you
press the display key MENU (open menu).
Setting the room monitor's sensitivity
MENU ;
s
Additional Features OK; Room Monitor OK ;
s
Level Features OK.
Deactivating the room monitor
To turn the room monitor off from outside (depends on the base), take the call that the
room monitor has initiated, and press
O R
. The room monitor function will
deactivate around 90 seconds after the call ends. The room monitor will make no
further calls. The other room monitor functions on the handset (e.g. no ringer) will
remain activated until you press MENU and OK on the handset that is in the baby's
room.
W Always check the settings of the room monitor before you leave
home, e.g. sensitivity and phone line.
i
The room monitor function severely curtails the handset's operating time.
If necessary you should place the 'room monitor handset' in the charger
to ensure that the battery does not run down.
[__________] [_____________________________________________________________] Call Internal
[_________ ] OK
Select the menu item and confirm.
[_________] [_________] OK
Select the handset and confirm.
or ... Enter an external number as the 'call to' number:
[__________] [_____________________________________________________________] Call External
[_________ ] OK
Select the menu item and confirm.
[_______] OK
Enter the number and confirm.
[_________] [_________] OK Select Low or High and confirm.