Siemens C2 - Manual (Page 17)

17
Using several handsets
Gigaset C2 / englisch / A31008-C002-B001-2-QD19 / tel_direct_hands_sett.fm / 28.03.2003
Managing entries in the last number redial list
Þ
(open last number redial list);
s
(select an entry); MENU
Viewing the calls and messages list
New calls/messages are indicated by a message in the display. Press the message key
f
to view the corresponding list.
Using several handsets
Transferring a call to another handset
Press INT, select
s
(handset) or Calling all , press
c
(top half).
The internal user answers: press
a
('end call' key).
Internal consultation calls
You can make an internal call while an external call is in progress.
Press INT;
s
(select handset); press
c
(top half of the key).
To end the call: MENU; Back OK (back to the outside caller).
Accepting/rejecting call waiting during an internal call
If you get an external call while conducting an internal call, you will hear the call
waiting tone (short tone).
To accept the call: MENU;
Accept Call Waiting OK
(you speak to the outside caller).
To reject the call: MENU;
Reject Call Waiting OK
(you speak to the internal caller).
The rejected call waiting tone can still be heard at other handsets.
Using a handset as a room monitor
With this function, a previously stored internal or external number is called when a set
noise level in the room is reached (the baby cries). When you answer the call you hear
the noise in the baby's room. The room monitor remains activated on the handset even
after you hang up.
The handset should be between 1 and 2 metres away from the baby. The microphone
must be directed towards the baby.
When the room monitor is activated, incoming calls to the handset which is near the
baby are indicated without a ring tone, they are just shown on the display.
When entering an external phone number, make sure that the line to which you want
the room monitor to be transferred is not blocked by an activated answering machine.
Use Number
Copy to Directory
Delete Entry
Delete List