Siemens C2 - Manual (Page 13)

13
Making calls
Gigaset C2 / englisch / A31008-C002-B001-2-QD19 / tel_direct_hands_sett.fm / 28.03.2003
Making calls
Making external calls and ending a call
External calls are calls into the public telephone network.
~ (enter the number), press c (Talk/Handsfree key).
To end the call: press a ('end call' key).
Inserting a dialling pause
You can insert a dialling pause between the prefix and the actual telephone number. To
do this, press
S
for around 2 seconds. Now enter the telephone number.
Internal calls, ending a call
Calls to other handsets that are registered to the same base are free of charge.
Calling a specific handset
Press INT; s (select handset) c . Or: press INT
2 (example)
To end the call: Press the 'end call' key a .
Calling all handsets ('group call')
Press INT and
P
. To end the call: Press the 'end call' key
a
.
Answering a call
Your handset rings, the call is displayed on the screen and the handsfree key
d
flashes.
Press
c
(top half of the key).
If the Auto Answer function is activated (page 19) you just need to lift the handset out
of the charging shell to take the call.
Handsfree
Activating/deactivating handsfree
Before you dial:
~
(enter the number); press
d
(bottom half of the key).
During a call: press
d
(bottom half of the key).
To deactivate: press
d
(top half of the key).
If you wish to place the handset in the charging shell during a call you must press the
bottom half of the d key and hold it down while you position the handset in the shell.
i
◆ You can also press the Talk/Handsfree key c first (you hear the
dialling tone) and then enter the number.
◆ You can use the end call key
a
to cancel the dialling operation.
i
You should inform your caller that you intend to use the handsfree
function before you activate it.