Siemens C2 - Manual (Page 11)

11
Date and Time
Gigaset C2 / englisch / A31008-C002-B001-2-QD19 / start_guide_time.fm / 28.03.2003
¼
appears on the bottom line of the display.
Changing the time mode
You can choose between the 12 or 24 hour display (the factory setting is 24 hour).
MENU
; s
Calender/Clock OK; s
Time Mode OK ; s (select display) OK ( ‰ = On);
a long press (back to idle status).
Setting the alarm clock
Precondition: The date and time have already been set (page 10).
Activating/deactivating the alarm clock
Activate:
¼
; Alarm Clock OK ; (
‰
= On).
To deactivate:
¼
; Alarm Clock OK ; (
‰
disappears).
Setting the wake-up time
Activate the alarm clock.
If you are using the 12 hour clock display, select a.m. or p.m. with
s
and
confirm (
‰
= On).
A wake-up call only sounds when the handset is in the idle status and the room monitor
function or Walk and Talk is not activated. When you deactivate the alarm clock the
¼
icon will only go out if there is no active appointment.
[_______________] MENU Open the menu.
[__________] [_____________________________________________________________] Calender/Clock
[_________] OK
Select the menu item and confirm.
[__________] [_____________________________________________________________] Date/Time
[_________] OK
Select the menu item and confirm.
[_______] OK
Enter the date and confirm. Example: For 1.5.2003,
enter
Q1Q5QI
.
[_______] OK
Enter the time and confirm. Example: For 9.35,
enter QOI5 .
[__________] [_________] OK
With the 12-hour display, select a.m. or p.m. and
confirm.
Long press (back to idle status).
[_______] OK Enter the wake-up time and confirm. The top line of
the screen displays the alarm clock icon
¼
.
Long press (back to idle status).
i
To find out how to set the wake-up volume and melody, turn to page 20.