Sharp SD-AS10 - Manual (Page 52)

52
SD-AS10
Ad
v
a
nced Features
-
O
p
e
rations a
fter
se
tt
ing the time
r -
Operations after setting the timer
" Checking the timer setting
" Canceling the timer setting
" Changing the timer setting
" To use the same timer setting
Once timer:
Daily timer:
The timer will operate at the same time every day. It will continue until the daily timer
setting is canceled. Cancel the daily timer when it is not in use.
When you use the same setting for the daily timer, select "DAILY TIMER" instead of
"ONCE TIMER", and select "DAILY ON" instead of "ONCE ON".
1
After setting the timer
! The unit is in the timer stand-by mode.
! If the timer set indicator does not light up, turn on the power and set the timer
again.
2
At the start time
The volume will increase gradually until it reaches the preset volume.
3
When the finish time is reached
The unit is set to the power stand-by mode automatically.
Lights up
Flashes
1 Press the TIMER/SLEEP/CLOCK button.
2 Within 10 seconds, press the or button to select "ONCE TIMER" or "DAILY
TIMER", and press the ENTER button.
3 Within 10 seconds, press the or button to select "ONCE CALL" or "DAILY
CALL", and press the ENTER button.
The unit returns to the timer stand-by mode after displaying the settings in order.
1 Press the TIMER/SLEEP/CLOCK button.
2 Within 10 seconds, press the or button to select "ONCE TIMER" or "DAILY
TIMER", and press the ENTER button.
3 Within 10 seconds, press the or button to select "ONCE OFF" or "DAILY OFF",
and press the ENTER button.
Timer will be canceled (the setting will be retained).
Perform steps 1 - 10 on page 51 to set the timer again.
1 Turn on the unit, and press the TIMER/SLEEP/CLOCK button.
2 Within 10 seconds, press the or button to select "ONCE TIMER", and press
the ENTER button.
3 Within 10 seconds, press the or button to select "ONCE ON", and press the
ENTER button.
4 Press the POWER button to enter the power stand-by mode.