Sharp SD-AS10 - Manual (Page 45)

45
SD-AS10
Ad
v
a
nced Features
- Cha
n
g
in
g the
d
e
fa
ult settings of the ampl
if
ie
r -
"
Speaker level setting
If sounds from the speakers are uneven, you can equalize them by adjusting the
speaker levels.
Note:
If subwoofer sound is distorted, lower the subwoofer level.
"
Test tone
You can check each speaker sound by a test tone. Readjust the volume set in
"Speaker level setting".
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
2
Within 10 seconds, press the or button to
select "SP LEVEL", and press the ENTER but-
ton.
3
Within 10 seconds, press the or button to
select the desired speaker.
The indicator of the selected speaker flashes.
4
Within 10 seconds, press the or button to
adjust the level.
! You can adjust the level at 1 dB intervals.
! To adjust the levels of other speakers, repeat the op-
eration from step 3.
5
Press the RETURN button twice.
The setting is complete.
Speaker type Level range Default setting
FL Front speaker (Left) - 6 dB to + 6 dB 0 dB
CT Center speaker - 6 dB to + 6 dB 0 dB
FR Front speaker (Right) - 6 dB to + 6 dB 0 dB
SR Surround speaker (Right) - 6 dB to + 6 dB 0 dB
SL Surround speaker (Left) - 6 dB to + 6 dB 0 dB
SW Subwoofer - 10 dB to + 10 dB + 3 dB
L
SL
R
SW
SR
C
L
SL
R
SW
SR
C
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
2
Within 10 seconds, press the or button to
select "TONE", and press the ENTER button.
The test tone will be heard from each speaker, in order, at about 2-second inter-
vals.
To adjust speaker levels
While the test tone is heard:
Adjust the level with the or button.
Press the or to select a speaker.
3
Press the RETURN button twice.
The setting is complete.
FL CT FR
SW SL SR