Sharp SD-AS10 - Manual (Page 44)

44
SD-AS10
Ad
v
a
nced Features
- Cha
n
g
in
g the
d
e
fa
ult settings of the ampl
if
ie
r -
Changing the default settings of the amplifier (continued)
"
Speaker delay setting
When some of the speakers are at a different distance from the listening point, you
can select the speaker delay to make it seem as though the speaker distances are
the same.
Switch the function to "DVD" to change the default settings of the amplifier.
If you press during the
operation, you can go
back one step.
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
2
Within 10 seconds, press the or button to
select "SP DELAY", and press the ENTER
button.
3
Within 30 seconds, press the or button to
select the desired speaker.
The indicator of the selected speaker flashes.
4
Within 30 seconds, press the or button to
select the distance.
! You can change the distance in 1 foot (0.3 m) steps.
! To set the distance of other speakers, repeat the op-
eration from step 3.
5
Press ENTER button to confirm the setting.
6
Press the RETURN button twice.
The setting is complete.
Speaker type Delay range Default setting
FL Front speaker (Left) 1 to 29 ft 6 ft (2 m)
CT Center speaker 1 to 29 ft 6 ft (2 m)
FR Front speaker (Right) 1 to 29 ft 6 ft (2 m)
SR Surround speaker (Right) 1 to 29 ft 6 ft (2 m)
SL Surround speaker (Left) 1 to 29 ft 6 ft (2 m)
SW Subwoofer 1 to 29 ft 6 ft (2 m)
L
SL
R
SW
SR
C
L
SL
R
SW
SR
C