Sharp SD-AS10 - Manual (Page 47)

47
SD-AS10
Ad
v
a
nced Features
- Changing the initia
l setting of D
V
D -
Setting Selectable parameters (* indicates
initial settings.)
Description
General Picture Mode Auto Images are automatically optimized according to the video source.
Film Suitable for progressive video output. Select for DVD movies, etc.
Video Suitable for interlaced video output. Select for DVD karaoke, etc.
Smart Optimize special effects for progressive video output.
Super Smart* Special effects are enhanced more than "Smart".
Angle Mark ON* You can switch camera angles if recorded on the disc.
OFF The angle mark does not appear.
OSD Language English*
French
Spanish You can select the desired OSD (On Screen Display) language for the setup menu or playback control screen.
Screen Saver ON* Press the button. After 5 minutes or more of inactivity, a screen saver appears.
To turn off the screen saver on the screen, press any button on the main unit or remote control.
OFF Cancel the screen saver setting.
Audio Audio Out BIT STREAM* Choose this when connecting the unit to a Dolby Digital/DTS (5.1 ch) surround amplifier. When playing a DVD record-
ed in Dolby Digital or DTS, bitstream output allows you to enjoy the 5.1 ch surround sound.
PCM Choose this for PCM output. When playing a DVD recorded in Dolby Digital, the output converts to 2-channel PCM.
When a DVD recorded in DTS is played back, signals are sent in bitstream.
LPCM Output 48K LPCM 48k
96K LPCM 96k* If 48K LPCM 48k is selected, PCM sound signals recorded at 96 kHz are converted to 48 kHz.