Sharp SD-AS10 - Manual (Page 39)

39
SD-AS10
Radio Operation
- Lis
te
ning t
o
the
ra
dio -
" Listening to the memorized station
You can store 40 AM and FM stations in total (preset tuning).
Note:
The backup function protects the memorized stations for a few days should there be
a power failure or the AC power cord disconnection.
To recall a memorized station:
To select a preset station with the direct number buttons:
! Press buttons within 5 seconds.
! To correct, enter the number again.
To erase all the contents of the preset memory:
1
Tune in the desired station and press
the ENTER button.
! For FM stations, stereo and mono modes
are memorized.
! Store the stations in memory, in order,
starting with preset channel 1.
2
Within 5 seconds, press the TUNER
PRESET ( or ) button to select the
preset channel number.
Preset channel number
3
Within 5 seconds, press the ENTER
button to store that station in memo-
ry.
When a new station is stored in memory, the station previously memorized will
be erased.
Press the TUNER PRESET ( or ) button to
select the desired station. Preset channel number
1 Set the MODE 1/MODE 2 switch to MODE 1.
2 Press the corresponding number ("0" - "9").
3 Press the ENTER button.
For example, to choose 28
1
Press the 2 button.
2 Press the 8 button.
3 Press the ENTER button.
1 Set the MODE 1/MODE 2 switch to MODE 2.
2 Hold the CLEAR button down for 4 seconds or
more.
3 Within 10 seconds, press the ENTER button.