Smeg SNZ61MFX - Manual (Page 16)

Instructions for the user
5.2.6 Switching off the alarm
The alarm switches off automatically after seven minutes. They can be
manually de-activated by pressing the keys and together.
5.2.7 Minute Counter
The programmer can also be used as a simple minute counter. By
pressing key , the display shows ; keep the key pressed and
at the same time press keys o . On releasing the key ,
programmed counting will begin and the display will show the current
time and the symbol .
After set-up, to see the remaining time, press the key .
Use as a minute counter does not interrupt functioning of the oven at the
end of the programmed time.
5.2.8 Cancellation of set data
Once the programme has been set, keep the key of the function to be
cancelled pressed, while at the same time
is reached by means
of variation keys o . Time cancellation will be considered as end-of-
cooking time by the programmer.
5.2.9 Changing the set data
The cooking data entered can be changed at any time by keeping the
function key pressed and at the same time adjusting the keys o .
5.3 Analogue clock (only on equipped models)
The mechanical timer is set by turning the knob
clockwise.
The timer can be set from 0 to 55 minutes. At
the end of the cooking time, an alarm signal will
be heard: to stop the alarm turn the external
part of the knob to position .
The clock is set by pulling the knob and turning
it clockwise.
18