Sony RM-NX7000 - Manual (Page 209)

209
Using a
“Memory Stick”
Formatting a “Memory Stick”
You can format a “Memory Stick” so that it can be used on this Remote
Commander.
1
Press the [SET] key for 2 seconds or longer in the Home display.
The Set display appears.
2
Press the [SYSTEM] key.
3
Press the [MEMORY STICK] key.
4 Press the [FORMAT] key.
The confirmation message for formatting
appears.
2
Press the [SYSTEM] key.
3
Press the [MEMORY STICK] key.
4
Press the [SAVE] key.
For further operations, see steps 2 and 3 in
“Saving Remote Commander data to a
“Memory Stick” (SAVE)” (page 207).
5
Press the [OK] key in the confirmation display.
The display returns to step 4.
6
To finish all settings, press the COMMANDER OFF button for 2
seconds or longer.
The display returns to the Home display. Or press the [EXIT] key repeatedly
until the Home display is shown.