Sharp Version 2.5 - Manual (Page 13)

Chapter 1 Installing the RightFax MFP Module 13
If you want to use the default RightFax user ID “WALKUP,” you
must create this user ID in RightFax using Enterprise Fax
Manager. Alternatively, you can set the Default User Name
field to the name of an existing RightFax user ID. Regardless of
the user ID you specify, the user ID should be configured in
RightFax with the sending options that you want for all faxes
originating from Sharp MFPs. For information about creating
and configuring RightFax user IDs, refer to the RightFax
Administrator’s Guide.
16. In the Default To Name field, enter a name that will be used as
the name of the intended recipient on the fax cover sheet if no
recipient name is specified by the sender.
17. In the Default From Name field, enter a name that will be used
as the name of the sender on the fax cover sheet if no RightFax
user ID is specified by the sender.
18. Click Next. This opens the Print Notifications? screen.
19. Select Print Notification only if you want a transmission status
message to be automatically printed on the Sharp MFP each
time it is used. Click Next. This opens the Email Notifications?
screen.
20. Select Email Notifications only if you want a transmission
status message to be automatically e-mailed back to the sender.
If you select this option, you must also specify an SMTP server
name, a destination e-mail address to use when no e-mail
address is available for the sender, and a sender name for the
message. Click Next.
21. On the Wizard Summary screen, click Finish.