Sony RDR-HX1000 - Manual (Page 62)

62
3
Press the number buttons to select the
number of the title, chapter, track, time
code, etc., you want.
For example: Time Search
To find a scene at 2 hours, 10 minutes, and 20
seconds, enter “21020.”
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
4
Press SET.
The recorder starts playback from the selected
number.
Note
“Title Search” is not applicable to the HDD.
Playing MP3 Audio Tracks
You can play MP3 audio tracks on DATA CDs
(CD-ROMs/CD-Rs/CD-RWs).
1
Insert a DATA CD on the disc tray.
2
Press H .
Playback starts from the first MP3 audio
tracks on the disc. Note that the playback
order may be different from the edited order.
See “Playback order of MP3 audio tracks”
below.
About MP3 audio tracks
MP3 is audio compression technology that
satisfies certain ISO/MPEG regulations.
You can play back DATA CDs (CD-ROMs/CD-
Rs/CD-RWs) recorded in MP3 (MPEG1 Audio
Layer 3) format. However, the discs must be
recorded according to ISO9660 Level 1, Level 2
or Joliet format for the recorder to recognize the
tracks. You can also play discs recorded in Multi
Session.
See the instructions supplied with the CD-R/CD-
RW drives and the recording software (not
supplied) for details on the recording format.
Note on Multi Session discs
If MP3 audio tracks are recorded in the first
session, the recorder will also play MP3 audio
tracks in other sessions. If audio tracks in Music
CD format are recorded in the first session, only
the first session will be played back.
DATA CD
1 2 3
4 5 6
7 8 9
0
H