Sony RDR-HX1000 - Manual (Page 26)

26
Connecting a VCR or Similar Device
After disconnecting the recorder’s mains lead from the mains, connect a VCR or similar recording device
to the LINE IN jacks of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack) (page 77).
See also the instruction manual supplied with the connected equipment.
To record on this recorder, see “Recording From Connected Equipment Without a Timer” (page 52).
Connecting to the LINE 3 jack
Connect a VCR or similar recording device to the LINE 3/DECODER jack of this recorder.
Notes
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen.
Be sure to connect your VCR to the DVD recorder and your TV in the order shown below. To watch video tapes,
watch the tapes through a second line input on your TV.
• The SMARTLINK features are not available for devices connected via the DVD recorder’s LINE 3/DECODER jack.
• When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD
button on the remote.
• If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected VCR.
AERIAL
IN
LINE 4 IN DIGITAL OUT
COAXIAL
OPTICAL
PCM/DTS/MPEG/ DOLBY DIGITAL
COMPONENT
VIDEO OUT
VIDEO S VIDEO AUDIO R L
LINE 2 OUT
VIDEO S VIDEO AUDIO R L
Y
P B / C B
P R / C R ~ AC IN OUT
LINE 1 - TV LINE 3 / DECODER
TV
DVD recorder
to i
LINE1-TV
VCR
to i LINE
3/DECODER
SCART cord
(not supplied)
to SCART input
VCR DVD recorder TV
VCR DVD recorder TV
Line input 1
Line input 2