Sanyo VPC-AZ3 EX - Manual (Page 72)

BASIC SHOOTING FUNCTIONS
Setting the focus
The focus setting can be changed depending on the distance to the subject.
1
Select the desired shooting mode
(see page 59).
œ If the Shooting Information Screen
appears, press the MENU button to
exit it.
2
Press the focus button.
œ The currently set focus setting is
shown on the LCD monitor.
No icon: For photography at normal
focus.
c : For close-up photography (10 to 50 cm)
å : For photography at distant focus (7 meters or more). Select this
setting when you know the distance to your subject beforehand
or when photographing a subject that is difficult to get into focus.
! : The focus can be set to any distance from 10 cm to
∞
(manual
focus). When manual focus is selected, the set distance is
shown to the left of the
!
icon.
3
Press the focus button to set the
desired focus mode.
œ Each time the focus button is
pressed, the focus mode changes.
œ If
!
is selected, press [ j ] or [ l ]
on the arrow button to set the
desired focus distance.
12
3.1
1/50
Focus setting
Focus button
LCD monitor
SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002
69
English