Sanyo VPC-AZ3 EX - Manual (Page 112)

Í >
œ The display to set the aperture size
and shutter speed appears.
œ Press [ d ] or [ c ] on the arrow button
to select aperture size \ or
shutter speed ä , and press [ j ] or
[ l ] on the arrow button to change
the setting.
Setting range:
Aperture \ : 4.9 to 11.8 (Tele)
2.7 to 6.7 (Wide)
Shutter speed ä : 16 sec. to
1/2500 sec.
4
Press the SET button.
œ This completes the exposure control setting.
œ You are returned to the Shooting Setting Screen.
HINT
œ When using a slow shutter setting, use a tripod or the like to stabilize the
digital camera.
œ A slow shutter speed makes shooting pictures in darker locations possible;
however, image noise may increase.
œ To reduce the noise, set the noise reduction to on.
œ When manual exposure control is selected, the exposure correction value
becomes
±
0 and exposure correction cannot be performed.
œ If the aperture value is set to F10 or higher, the resolution of the shot
picture may be slightly reduced.
CAUTION
œ While the Exposure Control Setting Screen is displayed (step 3), the zoom
function is disabled.
MANUAL 12
j
p 2.7 1/100
l
SELECT
SETTING
SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002
109
English