Sanyo VPC-AZ3 EX - Manual (Page 188)

Problem Cause Action
Reference
page
Viewing
images
The image is too
dark. The flash was
blocked by a
finger or other
object. Hold the digital
camera
correctly, and
make sure the
flash is not
obstructed.
55
The subject was
too far away. Capture the
image in the
range of
operation of the
flash.
71
The subject was
lit from behind. Use the forced
flash mode.
71
Use the
exposure
correction
function.
122
There is not
enough light. Adjust the
shutter speed.
107
Adjust the ISO
sensitivity
setting.
106
The image is too
bright. The forced flash
mode is
selected. Select a
different flash
mode.
71
The subject was
too bright. Change the
angle of the
digital camera.
—
Use the
exposure
correction
function.
122
TROUBLESHOOTING
SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002
185
English