1 using the self-cleaning liners, 2 maintenance of self-cleaning liners, 3 removing the self-cleaning liners – Smeg SC106 User Manual
Page 24: 1 remove the side runners (fig.1), 2 extract the side liners “f” and “g” (fig. 2), 4 replace the liners in their original positions, Instructions for the user
55
Instructions for the user
11.5 Cleaning the oven with self-cleaning liners (on some
models only)
The oven is fitted with enamelled liners that are continuously self-cleaning.
These liners simplify cleaning of the oven and ensure it continues to
perform well over time.
11.5.1 Using the self-cleaning liners
To keep the inside of the oven clean and free from food residues and
unpleasant smells, it should periodically be operated empty at a
temperature of at least 200° C for a time varying between 30 and 60
minutes. This allows the self-cleaning liners to oxidise any deposits
present, which can then be wiped away with a damp sponge once the
oven has cooled.
11.5.2 Maintenance of self-cleaning liners
The liners should not be cleaned using abrasive creams and ordinary
cleaners. Simply wipe with a damp sponge to avoid damaging the special
enamel coating.
11.5.3 Removing the self-cleaning liners
Remove all accessories from the inside of the oven and proceed as
follows:
1
Remove the side runners (fig.1);
2
Extract the side liners “F” and “G” (fig. 2);
3
Extract the back liner “A” after undoing the threaded ring-nut “C”
(fig. 2);
4
Replace the liners in their original positions.
1)
2)