Sharp XG-PH50X - Manual (Page 102)

-98
Note
• This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD)
mode. Should this occur, turn off the LCD display on the notebook computer and output the display data
in “CRT only” mode. Details on how to change display modes can be found in your notebook computer’s
operation manual.
• When this projector receives 640 × 350 VESA format VGA signals, “640 × 400” appears on the screen.
• When projecting the RGB interlace signal using INPUT 1/2 with “Signal Type” set to “Auto” or “RGB”, the
image may not be projected as desired. In this case, select either INPUT 4 (video) or INPUT 5 (S-video).
DTV
15.7
31.5
33.8
15.6
31.3
45.0
37.5
33.8
33.8
28.1 480 I/ 525 I
480P/525P
540P
576 I/ 625 I
576P/625P
720P/750P
720P/750P
1035 I/ 1125 I
1080 I/ 1125 I
1080 I/ 1125 I
60
60
60
50
50
60
50
60
60
50
Signal Vertical Frequency (Hz) DVI Support (Compatible with HDCP) Horizontal Frequency (kHz)
Computer Compatibility Chart