Speco Technologies 2 Channel HDcctv + 8 Channel Full D1 Digital Video Recorder DVR82HD - Manual (Page 72)

72
8-7-2. Record
Select RECORD tab to set the recording conditions.
These settings apply to the specified channel only.
Channel Designation
Resolution: Sets the resolution for the recordings. The set value applies to an individual channel.
Frame Rate: Sets the recording rate.
Quality: Sets the image quality in 5 levels.
Recording: Sets the recording mode.
Sensor Recording: Sensor recording is performed when an external sensor signal is input to
the specified external sensor input terminal.
Pre Record: Sets whether to perform or not pre recording.
Post Event Record: Sets the duration of the event recording.
Audio: Sets whether to perform or not audio recording.
These settings apply to all channels.
EZRECORD
Resolution: Sets the resolution for the recordings. The set value applies to an individual channel.
Frame Rate: Sets the recording rate.
Quality: Sets the image quality in 5 levels.
Recording: Sets the recording mode.
DAYS TO RECORD: By the setting value, the DAYS TO RECORD will change accordingly.