Speco Technologies 2 Channel HDcctv + 8 Channel Full D1 Digital Video Recorder DVR82HD - Manual (Page 25)

25
4-3. Setup – RECORD
In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item.
Figure 4.3.1. Recording Mode Setup Screen
Table 4.3.1. Menu Items in Recording Mode Setup
Menu Item Description
CHANNEL Select a channel for applying the following settings using the mouse or the control
button on the remote control.
RESOLUTION Set the resolution for the specified channel.

Analog Channel (1 - 8 Ch.): D1, Half D1 and CIF

HDcctv Channel (9 - 10 Ch.): 1920x1080, 1920x540, 1280x720, 640x360
FRAME RATE Set the frame rate for the specified channel. The sum of the frame rate values from
each channel cannot exceed the maximum frame rates for a specific recording
resolution.
Typical values of the maximum frame rate for video are

Analog 1 - 8 CH: D1@240/200 fps

HDcctv 9 - 10 CH: 1080p@30/25fps or 720p@60/50fps