Speco Technologies 2 Channel HDcctv + 8 Channel Full D1 Digital Video Recorder DVR82HD - Manual (Page 31)

31
4-4-3. Spot Out
Figure 4.4.4. SPOT-OUT Setup Screen
Table 4.4.4. Menu Item in SPOT-OUT Setup Screen
Item Description
SPOT OUT Spot Out 1: from 1 channel to 4 channel
Spot Out 2: from 5 channel to 8 channel
Spot Out 3: for 9 channel
Spot Out 4: for 10 channel
SPOT TYPE Select Full screen or Quad screen mode.
SPOT ON EVENT Enable/Disable display of the channel when an event is active.
SPOT EVENT
DWELL TIME
Set the dwell time for the display of the event activated channel.
(3-10sec)
SEQUENCE Enable/disable sequential display of spot channel in full screen.
If select ON, spot channel selection screen is displayed.
SEQ-DWEL TIME Set the dwell time for the spot channel display.(3-10sec)
SPOT CHANNEL Select a channel for spot monitoring using the mouse or the control
button on the remote control and press OK button.