Smeg SE1055MF - Manual (Page 11)

Using the oven FR
37
3. Using the oven
3.1 W ARNINGS AND GENERAL ADVICE
Before using the oven for the first time, pre-heat it to maximum
temperature (280°C) long enough to burn any manufacturing oily
residues which could give the food a bad taste.
After a power failure, the display will flash at regular intervals showing
.
To regulate, refer to para. 2.2 "Electronic programmer”.
To prevent any steam in the oven creating problems,
open the door in two stages: half open (5 cm approx.)
for 4-5 seconds and then fully open.
To access food, always leave the door open as short a
time as possible to prevent the temperature in the
oven from falling and ruining the food.
3.2 O VEN LIGHT
The light comes on by turning the function switch to any position or by
opening the door with the oven off.
3.3 C OOLING VENTILATION
The oven features cooling fans which switch on together with
the oven.
Fan operation causes a normal flow of air which exits at the
bottom part of the oven front.
PYROLYSIS : once the cleaning cycle has started, the fans only
operate when the oven has achieved a preset temperature.