Siemens Plant Central Clock TC100 - Manual (Page 88)

Parameter table
10-8 © Siemens AG 2010 All Rights Reserved
SICLOCK ® TC100 Operating Instructions
Redundanz
0.09.10
Redundancy Priority Min:
Max:
Default: Master
Slave
Master
Timeout Min:
Max:
Default: 10 mins
720 mins
30 mins
Network settings / Ethernet 1
0.05.01
IP adapter 1 IP address Min:
Max:
Default: 0.0.0.0
255.255.255.255
192.168.1.10
Subnet mask Min:
Max:
Default: 0.0.0.0
255.255.255.255
255.255.255.0
Gateway Min:
Max:
Default: 0.0.0.0
255.255.255.255
0.0.0.0
0.05.05
Network adapter 1 Hardware address Min:
Max:
Default: 00.00.00.00.00.00
FF.FF.FF.FF.FF.FF
00.00.00.00.00.00
0.09.13
Line status adapter 1 Link Min:
Max:
Default: ---
down
---
Linespeed Min:
Max:
Default: ---
100 Mb/s
---
Duplex Min:
Max:
Default: ---
Half duplex
---
0.05.09
Advanced Settings
Adapter 1 Monitor link status Min:
Max:
Default: Off
Alarm
Off
SIMATIC mode
0.15.01
Ethernet 1 Mode Min:
Max:
Default: Off
S5-compatible, every 10 s
Off
Send condition Min:
Max:
Default: ---
Only when synchronized
---
Destination address Min:
Max:
Default: 00.00.00.00.00.00
FF.FF.FF.FF.FF.FF
FF.FF.FF.FF.FF.FF
Table 10-1 List of SICLOCK TC100 parameters
Access 1)
/ no.
Parameter Eintry Value range / default